22-Part Tap & Die Set
$39.98
Excl. Tax
- 22-piece set
- For internal & external threads
- M3 to M12
- In case
- Made of carbon steel with zinc alloy
10033743 / 4052025337438
Secure Payment
Instructions for Tapping External and Internal Threads
To make an internal thread, first drill the core hole to the appropriate size. Then clamp the appropriate tap into the tap wrench and oil it with cutting fluid. The tap should be screwed in clockwise under light pressure. After half a turn, turn the tap back to break the chip.To make an external thread, first measure the diameter of the stud to determine the appropriate thread size. Then file the stud to a conical shape. Insert the die into the die holder and tighten the screw. Place the die straight onto the screw and lubricate with cutting fluid. Turn the die with light pressure on the screw. The die should be turned back from time to time to break the chips. Continue turning until the required thread length is achieved.
Set for Thread Cutting
- Stored neatly in a practical case
- For producing external & internal threads
- With thread template for determining the pitch
- High-quality workmanship made from robust steel
- For private & professional use
Metric Threads: Nominal dimension - Pitch - Core hole - Bolt in mm
- M3 - 0.5 - 2.5 - 2.9
- M4 - 0.7 - 3.3 - 3.9
- M5 - 0.8 - 4.2 - 4.9
- M6 - 1.0 - 5 - 5.9
- M7 - 1.0 - 6 - 6.9
- M8 - 1.25 - 6.8 - 7.9
- M10 - 1.5 - 8.5 - 10
- M12 - 1.75- 10.2 - 11.8
Core Hole Dimensions for NPT
- Thread size: 1/8" - 27 NPT
- Pitch: 27 threads per inch
- Pitch: 0.941 mm
- Outer diameter: 10.242 mm
- Core hole: 8.25 mm
Details of Thread Cutting Set
- Case dimensions H x W x D: approx. 2.5 x 25 x 15.5 cm
- Dimensions tap wrench H x W x D: approx. 1 x 20 x 2 cm
- Die holder dimensions H x W x D: approx. 1.5 x 21.5 x 4 cm
- Die dimensions H x D: approx. 1 x 2.5 cm
- Tool material: Carbon steel with zinc alloy
Sizes Included in Set
- Cutting dies: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M7 x 1.0, M8 x 1.25, M10 x 1.5, M12 x 1.75, 1/8 NPT27
- Tap: M3, M4, M5, M6, M7, M8, M10, M12, 1/8 NPT27
- Thread gauge: 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0, 1.25, 1.5, 1.75, 27, 28
Included in Delivery
- 9x cutting die
- 1x tap holder
- 9x taps
- 1x tap wrench
- 1x thread gauge
- 1x box
- Without decoration
Material composition
- 80% Steel
- 10% Metal
- 10% Plastic